parts catalogue

Forum für klassische und neue Gilera-Motorräder
Bulletin Board for classic and new Gilera-Motorcycles

Moderator: Joachim

Post Reply
kevjac
Tank-Reserve-Benutzer
Posts: 5
Joined: Sun Oct 02, 2011 7:52 pm

parts catalogue

Post by kevjac » Wed Nov 09, 2011 5:02 pm

Hi kev here from the uk dose anybody have a parts list for the rrt 125 engine or failing that can anybody tell me the type and referance number for the main bearings in my rrt 125

regards kev

User avatar
Joachim
Gileristi
Posts: 8338
Joined: Tue Dec 31, 2002 9:10 pm
Location: Zweibrücken bzw. Landau/Pfalz
Contact:

Re: parts catalogue

Post by Joachim » Wed Nov 09, 2011 5:39 pm

Sorry, no lists :(
But in most cases roller bearings are stamped with a number on the small side of on of the rings. Maybe you can read this ;)
Or just measure the inner and outer diameter and the width of the bearing.

good luck, Joachim
Image

kevjac
Tank-Reserve-Benutzer
Posts: 5
Joined: Sun Oct 02, 2011 7:52 pm

Re: parts catalogue

Post by kevjac » Wed Nov 09, 2011 6:05 pm

hi thanks for reply unfortunately cant read side of bearing and as one is sealed i belive that engine has wrong bearings installed

regards kev

User avatar
Joachim
Gileristi
Posts: 8338
Joined: Tue Dec 31, 2002 9:10 pm
Location: Zweibrücken bzw. Landau/Pfalz
Contact:

Re: parts catalogue

Post by Joachim » Wed Nov 09, 2011 6:40 pm

main bearings are the crankshaft bearings?
You are right, it's very unusuall that those are sealed.
Usually unsealed bearings with C3 or C4 gap are used. But that is not a help for you i think :(

<edit> I have just checked back some of my Gilera papers.
Flywheel side is C5
Clutch side is C4
Together with the measurements of the old bearings you should get something new
The parts lists only tell 'bearing' ;)


What type of engine did you have? The one with the inlet in to the cylinder i think. APTS?
Maybe somebody with a engine similar to yours can give you a help. I think even in the parts lists are no bearing numbers or measurements to find. I fear you only can get a Gilera part number.

ciao Joachim
Image

kevjac
Tank-Reserve-Benutzer
Posts: 5
Joined: Sun Oct 02, 2011 7:52 pm

Re: parts catalogue

Post by kevjac » Wed Nov 09, 2011 7:47 pm

Hi thanks i've managed to find out they are 6305 what does the c4 or c5 mean

regards kev

User avatar
Joachim
Gileristi
Posts: 8338
Joined: Tue Dec 31, 2002 9:10 pm
Location: Zweibrücken bzw. Landau/Pfalz
Contact:

Re: parts catalogue

Post by Joachim » Wed Nov 09, 2011 7:51 pm

You only have to say this at the shop and you will get the right ones :)
It means that the bearings have a bigger radial play.
That is needed because the bearings are running at higher temperatures.
Don't mix them up while mounting.
I can check back the numbers at the weekend. At home i have a spare set of crank bearings.

ciao Joachim
Image

kevjac
Tank-Reserve-Benutzer
Posts: 5
Joined: Sun Oct 02, 2011 7:52 pm

Re: parts catalogue

Post by kevjac » Wed Nov 09, 2011 8:01 pm

Thanks

regards kev

Post Reply